Specifications
Description
802.11ac Wave 2 AP, 3×3:2, Internal Antenna, E Regulatory Domain
Software
Cisco Unified Wireless Network Software Release with AireOS wireless controllers:
8.1.121.0 or later for the Cisco Aironet 1830 Series Access Points
Deployment modes
Centralized, standalone, sniffer, Cisco FlexConnect™, monitor, OfficeExtend, mesh
Supported wireless LAN controllers
Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Cisco Catalyst®6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco 5520 Series Wireless Controllers, Cisco Flex® 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco 8540 Series Wireless Controllers, Cisco 5760 Wireless LAN Controller, Cisco Catalyst 3650 and 3850 Series Switches with integrated controller
Cisco Mobility Express
802.11n version 2.0 (and related) capabilities
3×3 MIMO with two spatial streams
Maximal ratio combining (MRC)
20- and 40-MHz channels
PHY data rates up to 300 Mbps (40 MHz with 5 GHz)
Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
802.11 dynamic frequency selection (DFS)
Cyclic shift diversity (CSD) support
802.11ac Wave 1 and 2 capabilities
3×3 MIMO with two spatial streams, single-user or multiuser MIMO
MRC
802.11ac beamforming (transmit beamforming)
20-, 40-, and 80-MHz channels
PHY data rates up to 867 Mbps (80 MHz in 5 GHz)
Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
802.11 DFS
CSD support
Regulatory Domain
E (E regulatory domain):
– 2.412 to 2.472 GHz; 13 channels
– 5.180 to 5.320 GHz; 8 channels
– 500 to 5.700 GHz; 8 channels
Integrated antenna
2.4 GHz, gain 3 dBi, internal omni, horizontal beamwidth 360°
5 GHz, gain 5 dBi, internal omni, horizontal beamwidth 360°
Interfaces
1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE)
Management console port (RJ-45)
USB 2.0 (enabled via future software)
Indicators
Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
Dimensions (W x L x H)
Access point (without mounting bracket): 8.3 x 8.3 x 2 in. (210.8 x 210.8 x 50.8 mm)
Weight
3.12 lb (1.41 kg)
Environmental
Cisco Aironet 1830i
Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
Nonoperating (storage) altitude test: 25˚C, 15,000 ft.
Operating temperature: 32° to 104°F (0° to 40°C)
Operating humidity: 10% to 90% (noncondensing)
Operating altitude test: 40˚C, 9843 ft.
System memory
1 GB DRAM
256 MB flash
Input power requirements
AP1830: 44 to 57 VDC
Power supply and power injector: 100 to 240 VAC; 50 to 60 Hz
Power draw
15.4W
Note: When deployed using a PoE specification, the power drawn from the power sourcing equipment will be higher by some amount, depending on the length of the interconnecting cable.
Powering options
802.3af/802.3at
Enhanced PoE
Cisco local power supply, AIR-PWR-C=
Cisco power injector, AIR-PWRINJ5= (Note:This injector supports 802.3af only), AIR-PWRINJ6=
Note: If 802.3af PoE is the source of power, the USB port is disabled.
Warranty
One-Year
Reviews
There are no reviews yet.